Arturo EP3900
Arturo EP3900 Floorcoating is a 2-component, epoxy based, coloured floor coating with glossy finish (2-C, EP)
Applications
Suitable as a durable, seamless, abrasion-resistant, coloured coating for cement, anhydrite and magnesite bound subfloors. Arturo EP3900 Coating is especially suitable as a coating on floors that are exposed to light and medium loads, for example for:
- Storage areas
- Workshops
- Parking garages
- Shops
Arturo EP3900 Floor Coating is also suitable on the Arturo EP2500 Self-smoothing Floor for medium - heavy loads.
Properties
- Glossy
- Seamless
- Low odour
- Abrasion resistance
- Good resistance to chemicals
- Easy to apply
- Easy to clean
| Consumption |
200 - 300 g/m² per layer. |
|---|---|
| Mixing ratio |
85.0 part by weight comp. A |
| Full mechanical resilience |
After 3 days* |
| Water and chemically resistant |
After 7 days* |
| Layer thickness |
Approx. 0,15 mm |
| Solids content |
100% |
| Article number | Article | Packsize |
|---|---|---|
| Multiple colours | Arturo EP3900 1 kg | Set: A + B = 1 kg: A = 0,85 kg, B = 0,15 kg |
| Multiple colours | Arturo EP3900 15 kg | Set: A + B = 15,00 kg: A = 12,75 kg, B = 2,25 kg |
| Multiple colours | Arturo EP3900 25 kg | Set: A + B = 25,00 kg: A = 21,25 kg B = 3,75 kg |
| Multiple colours | Arturo EP3900 3,75 kg | Set: A + B = 3,75 kg: A = 3,19 kg, B = 0,56 kg |
| Multiple colours | Arturo EP3900 7,5 kg | Set: A + B = 7,50 kg: A = 6,38 kg, B = 1,12 kg |







Frequently Asked Questions
Yes. Arturo EP3900 is suitable for correctly prepared concrete and cement-, anhydrite- and magnesite-bound subfloors. The substrate must be sound, sufficiently dry and free from oil, grease, loose material and other contaminants that could affect adhesion.
In the standard system described by Arturo, the first layer of EP3900 acts as the primer and the second layer forms the coating. Rough subfloors may require an Arturo EP6200 scratch coat before application. The correct preparation and system build-up depend on the substrate’s condition.
Arturo EP3900 can be used in slip-resistant flooring configurations. Arturo lists R10, R11 and R12 test certificates as available on request. The achieved slip resistance depends on the specified surface treatment and system build-up, so the required rating should be confirmed with Arturo.
Typical consumption is 200–300 g/m² per layer. Actual material requirements depend on the subfloor, application method and flooring system. Specialist configurations, such as an OS8 system, have different consumption requirements, so use the relevant system specification when estimating quantities.
Arturo EP3900 provides a glossy, coloured finish. Available colours are shown on the Arturo EP3900 colour chart, with other colours available on request. Some colours, particularly yellow, orange and red, may require additional layers to achieve adequate coverage.
