Arturo EP6700

Very low emission, 2-component, epoxy-based primer, damp-proof membrane and resin for use as a scratch coat.

It is suitable as a very low emission primer on cement, anhydrite and magnesite bound subfloors. Arturo EP6700 Primer is especially suitable:

As a primer under EP and PU self-smoothings.
For manufacturing scratch coat (max.1:1 with Arturo sand, grain size 0.1 - 0.3 mm or Arturo Filler).
As an adhesion layer, wet-in-wet under EP mortar.
Moisture barrier on cement bound subfloors (max. 5% residual moisture content)

Consumption	200-350 g/m² as a primer. 500-1300 g/m² as a scratch coat (depends on the surface) Damp-proof membrane: always film-forming and closed, min. 500 g/m² on concrete, min. 700 g/m² on anhydrite and cementitious screeds. See ‘Arturo Informationsheet Osmose’.
Mixing ratio	67.0 part by weight comp. A 33.0 part by weight comp. B
Solids content	100%