Published on:
Private Residential Gallery | Burton Dassett, UK
Data
- Building type
- Residential Houses
- Date
- 07.10.2026
- Area
- 100 m²
- Country
- United Kingdom
The client required a flooring solution that would complement the gallery’s refined aesthetic while meeting the practical demands of a high-traffic public space. The brief called for a seamless, joint- and grout-free surface in a mid-light grey, matched to a specified RAL colour. Alongside its clean, contemporary appearance, durability and ease of maintenance were key considerations, given the consistent level of visitor footfall the gallery receives.
The Challenge
The initial inspection revealed that the existing polished concrete floor was unsuitable for direct refurbishment. The substrate showed extensive cracking, uneven aggregate-rich areas, and residual layers from previous sealer applications, all of which would have compromised the adhesion and performance of a new finish.
Given the extent of the underlying defects, a simple preparation and recoating approach was not viable. The existing surface required comprehensive mechanical removal, followed by reconstruction and preparation of the substrate to create a stable, uniform base for the new resin flooring system.
Solution
The existing polished concrete and residual sealer were mechanically ground back to expose a sound, stable substrate. The team repaired structural cracking to stabilise the slab, then applied a smoothing underlayment to address surface irregularities and create a consistent, flat plane.
Once the substrate had been fully prepared, an Arturo epoxy primer was applied to seal the repaired surface and provide a strong mechanical key for the subsequent flooring system. This was followed by a colour-matched polyurethane finish, carefully selected to replicate the refined appearance of polished concrete while delivering enhanced durability and long-term performance.
Products Used
Arturo's two-part polyurethane system was specified for the finish coats. ArturoPU3320, a coloured waterborne polyurethane coating with a satin finish, was first applied to match the RAL mid-light grey base colour. Arturo PU7320, a transparent waterborne polyurethane sealer with a satin finish, was then applied as a sealer to secure the colour and enhance durability. Both products are low-VOC and waterborne, a key consideration for indoor air quality within an occupied residential setting.
Why This System
The combination of Arturo PU3320 and Arturo PU7320 gave the client the exact RAL colour in a truly seamless finish across the full 100 m², with a satin sheen suited to a gallery, enough to feel considered without competing with the artwork or creating glare. The sealed surface resists staining, chemicals, and scuffing, so it wipes clean with routine care rather than a specialist maintenance regime, and the low-VOC formulation keeps the installation compatible with a lived-in home.
